Classic UNO R3, ATmega16U2+ATmega328P-PU, Carte compatible Arduino
Vue d’ensemble
Clone fidèle de l’Arduino UNO R3 utilisant les composants Italiens d’origine : ATmega16U2 USB-Série (pas CH340G) et ATmega328P-PU DIP-28 sur socket (remplaçable sans soudure). Compatible 100% avec tous les shields UNO existants. Le choix recommandé pour débuter en Arduino, projets éducatifs et prototypage.
Spécifications
| Spécification | Valeur |
|---|---|
| Main Microcontroller | ATmega328P-PU (DIP-28, socketed) |
| USB-Serial Chip | ATmega16U2 (genuine, not CH340G) |
| Clock | 16 MHz |
| Flash Memory | 32 KB (0.5 KB bootloader) |
| SRAM | 2 KB |
| EEPROM | 1 KB |
| USB Connector | Type-B (full-size) |
| Digital I/O Pins | 14 (6 PWM) |
| Analog Input Pins | 6 |
| Operating Voltage | 5 V |
| Input Voltage (Vin) | 7–12 V (recommended) |
| Input Voltage Limits | 6–20 V |
| DC Output | 5 V @ 500 mA, 3.3 V @ 50 mA |
| Dimensions | 68.6 × 53.4 mm |
| Form Factor | Arduino UNO R3 (shield-compatible) |
Applications courantes
- Apprentissage des fondamentaux Arduino (la carte canonique)
- Projets robotiques scolaires
- Prototypage avec shields (Ethernet, moteur, capteurs)
- Installations permanentes (MCU remplaçable)
- Tout sketch ciblant Arduino UNO