STM32F103C8T6 — 64KB Flash, STM32 ARM Cortex-M3 Mini-System-Entwicklungsboard (STM-Firmware)
Überblick
Entwicklungsboard basierend auf STM32 ARM Cortex-M, deutlich leistungsfähiger als klassische Arduinos. 32 Bit, bis 72 MHz, 12-Bit ADC, natives USB. Für DSP, Motorsteuerung, Audioverarbeitung, Drohnen und jede Anwendung mit Bedarf an Fließkomma-Leistung oder präzisen ADC-Wandlungen.
Spezifikationen
| Spezifikation | Wert |
|---|---|
| Microcontroller | STM32F103C8T6 |
| Core | ARM 32-bit Cortex-M3 |
| Clock | 72 MHz (internal) / 8 MHz external crystal |
| Flash Memory | 64 KB (some report 128 KB usable — see notes) |
| SRAM | 20 KB |
| GPIO | 32 (15 PWM) |
| ADC | 10 channels @ 12-bit |
| UART | 3 hardware |
| I²C | 2 |
| SPI | 2 |
| USB | USB 2.0 Full Speed (device only) |
| Operating Voltage | 3.3 V (most pins 5V-tolerant) |
| Input Voltage (Vin) | 4–8 V DC |
| Bootloader | Factory ROM bootloader (System Memory) |
| Programming | ST-Link V2 (SWD) or serial via System Memory bootloader |
Typische Anwendungen
- Motorsteuerung (BLDC, Schrittmotor) mit FreeRTOS
- Audio-Effektpedale (DSP)
- Drohnen-Flugcontroller
- Echtzeit-Datenerfassung
- Signal- / Funktionsgeneratoren